Professional wood moisture meter Metrinco M110W

METRINCO M110W: non-destructive high-precision wood moisture meter.

This moisture meter is designed to measure the moisture content of processed wood (planed board or beam, finished wood products, etc.). It has the highest measurement accuracy among our line of non-destructive wood moisture meters (in practice, the accuracy is less than 1%). It is designed to work with wood up to 40 mm thick.

Features of Metrinco M110W:

• The moisture meter is based on the dielcometric measurement method.
• The device can determine the moisture content of wood products in the range from 0 to 40 % with very high accuracy.
• For convenience, wood types are divided into 5 groups depending on their density and are presented in the selection menu in English, which greatly simplifies the operation of the device.
• The surface of the sample should be flat at the measurement point and tightly adjacent to the sensor surface. Roughness of the surface and the presence of air gaps between the antenna and the sample can degrade the measurement accuracy.

Technical characteristics of the Metrinco M110W wood moisture tester:

• measurement method: dielcometric, non-destructive
• measuring range: 0-40 %
• number of wood groups: 5
• accuracy: ±1,2%
• resolution: 0,1 %
• penetration of the high-frequency radiation field: 40 mm
• operating conditions: 0~60 °C, 0-90 % relative humidity
• power supply: 3 1.5 V AAA batteries
• dimensions: 115x68x25 mm
• weight: 140 g with battery

Functions of the Metrinco M110W moisture meter:

• Holding the measurement result on the screen. It is switched on and off by the "Λ/HOLD" button and in the measurement mode provides fixation of the measurement result on the device screen until the button is pressed again.
• Battery charge control. The device signals the battery discharge with a corresponding image on the display. When the battery is discharged below a certain threshold, the device does not switch on, but signals about the discharged battery by flashing the screen backlight.
• Screen backlight. Switch on/off by pressing the "Λ/LIGHT" button in the measurement mode.
• Auto power off. If the device is not active (no buttons were pressed or the measurement result was changed) for 5 minutes, it automatically switches off.